vj x8r www.vishay.com vishay vitramon revision: 08-aug-11 1 document number: 45006 for technical questions, contact: mlcc@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 surface mount multilayer ceramic chip capacitors for high temperature applications features ? specialty: high tempe rature applications ? high operating temperature dielectric, up to + 150 c ? maintains capacitance at high temperature for frequency stability ? wet build process ? reliable noble metal electrode (nme) system ? compliant to rohs directive 2002/95/ec ? halogen-free according to iec 61249-2-21 definition applications ? high temperature modules electrical specifications note ? electrical characteristics at + 25 c unless otherwise specified. operating temperature: - 55 c to + 150 c capacitance range: 470 pf to 390 nf voltage range: 25 v dc to 50 v dc temperature coefficient of capacitance (tcc): 15 % from - 55 c to + 150 c dissipation factor (df): 25 v ratings: 3.5 % maximum at 1.0 v rms and 1 khz 50 v ratings: 2.5 % maximum at 1.0 v rms and 1 khz aging rate: 1 % maximum per decade insulation resistance (ir): at + 25 c and rated voltage 100 000 m ? minimum or 1000 ? f, whichever is less at + 125 c and rated voltage 10 000 m ? minimum or 100 ? f, whichever is less dielectric strength test: performed per method 103 of eia-198-2-e applied test voltage: ? 50 v dc -rated: 250 % of rated voltage
vj x8r www.vishay.com vishay vitramon revision: 08-aug-11 2 document number: 45006 for technical questions, contact: mlcc@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? detail ratings see selection chart notes (1) dc voltage rating should not be exceeded in application. other application factors may affect the mlcc performance. consult for questions: mlcc@vishay.com (2) process code may be added wi th up to three digits, used to control non-standard products and requirements. (3) termination code e for conductive epoxy assembly. (4) marking in reference to eia198, see www.vishay.com/doc?45028 quick reference data dielectric case maximum voltage (v) capacitance minimum maximum x8r 0603 50 470 pf 33 nf 0805 50 470 pf 100 nf 1206 50 1.0 nf 220 nf 1210 50 10 nf 390 nf ordering information vj0805 h 102 k x a a c ### (2) case code dielectric capcitance nominal code capacitance tolerance termination dc voltage rating (1) marking (4) packaging process code 0603 0805 1206 1210 h = x8r expressed in picofarads (pf). the first two digits are significant, the third is a multiplier. examples: 102 = 1000 pf j = 5 % k = 10 % m = 20 % x = ni barrier 100 % tin plated f, e = agpd (3) x = 25 v a = 50 v a = unmarked m = marked note: marking is only available for 0805 and 1206 with termination code x t = 7" reel/plastic tape c = 7" reel/paper tape r = 11 1/4"/13" reel/plastic tape p = 11 1/4"/13" reel/paper tape o = 7" reel/flamedpaper tape i = 11 1/4"/13" reel/flamed paper tape note: i and o are used for f and e termination size 0603/0805 dimensions in inches (millimeters) eia style part ordering number length (l) width (w) maximum thickness (t) termination (p) minimum maximum 0603 vj0603 0.063 0.005 (1.60 0.12) 0.031 0.005 (0.80 0.12) 0.036 (0.92) 0.012 (0.30) 0.018 (0.46) 0805 vj0805 0.079 0.008 (2.00 0.20) 0.049 0.008 (1.25 0.20) 0.057 (1.45) 0.010 (0.25) 0.028 (0.71) 1206 vj1206 0.126 0.008 (3.20 0.20) 0.063 0.008 (1.60 0.20) 0.067 (1.70) 0.010 (0.25) 0.028 (0.71) 1210 vj1210 0.126 0.008 (3.20 0.20) 0.098 0.008 (2.50 0.20) 0.067 (1.70) 0.010 (0.25) 0.028 (0.71) l w t max. p
vj x8r www.vishay.com vishay vitramon revision: 08-aug-11 3 document number: 45006 for technical questions, contact: mlcc@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) see soldering recommendations with in this data book, or visit www.vishay.com/doc?45034 ? plastic tape, ?? paper tape note (1) reference: eia standard rs481 - taping of surface mo unt components for automatic placement selection chart dielectric x8r style vj0603 vj0805 vj1206 vj1210 (1) eia code 0603 0805 1206 1210 voltage (v dc ) 2550255025502550 voltage code xaxaxaxa cap. code cap. 331 330 pf 391 390 pf 471 470 pf ?? ?? ?? 561 560 pf ?? ?? ?? 681 680 pf ?? ?? ?? ?? 821 820 pf ?? ?? ?? ?? 102 1.0 nf ?? ?? ?? ?? ? ? 122 1.2 nf ?? ?? ?? ?? ? ? 152 1.5 nf ?? ?? ?? ?? ? ? 182 1.8 nf ?? ?? ?? ?? ? ? 222 2.2 nf ?? ?? ?? ?? ? ? 272 2.7 nf ?? ?? ?? ?? ? ? 332 3.3 nf ?? ?? ?? ?? ? ? 392 3.9 nf ?? ?? ?? ?? ? ? 472 4.7 nf ?? ?? ?? ?? ? ? 562 5.6 nf ?? ?? ?? ?? ? ? 682 6.8 nf ?? ?? ?? ?? ? ? 822 8.2 nf ?? ?? ?? ?? ? ? 103 10 nf ?? ?? ?? ?? ? ? ? ? 123 12 nf ?? ?? ?? ?? ? ? ? ? 153 15 nf ?? ?? ?? ?? ? ? ? ? 183 18 nf ?? ?? ?? ?? ? ? ? ? 223 22 nf ?? ?? ?? ? ? ? ? 273 27 nf ?? ?? ? ? ? ? ? 333 33 nf ?? ?? ? ? ? ? ? 393 39 nf ?? ? ? ? ? ? 473 47 nf ? ? ? ? ? ? 563 56 nf ? ? ? ? ? ? 683 68 nf ? ? ? ? ? 823 82 nf ? ? ? ? ? 104 100 nf ? ? ? ? ? 124 120 nf ? ? ? ? 154 150 nf ? ? ? 184 180 nf ? ? ? 224 220 nf ? ? ? 274 270 nf ?? 334 330 nf ?? 394 390 nf ? 474 470 nf 564 560 nf 684 680 nf 824 820 nf x8r packaging quantities (1) body size tape size 7" reel quantities 11 1/4" and 13" reel quantities packaging code packaging code c/o t p/i r 0603 8 mm 4000 n/a 10 000 n/a 0805 8 mm 3000 3000 10 000 10 000 1206 8 mm n/a 3000 10 000 10 000 1210 8 mm n/a 3000 10 000 10 000
vj x8r www.vishay.com vishay vitramon revision: 08-aug-11 4 document number: 45006 for technical questions, contact: mlcc@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 storage and handling conditions (1) store the components at 5 c to + 40 c ambient temperature and ? 70 % related humidity conditions. (2) the product is recommended to be used within a time-frame of 2 years after shipment. check solderability in case extended shelf life beyond the expiry date is needed. precautions: a. do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alka li, salt or the like are present. this may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. store products on the shelf and av oid exposure to mo isture or dust. c. do not expose products to excessive shoc k, vibration, direct sunlight and so on. x8r dielectric - typical parameters - 75 - 50 - 25 0 25 50 75 100 125 15 10 5 0 - 5 - 10 - 15 - 20 temperature c 150 175 temperature coefficient of capacitance % capacitance change a g in g rate hour s 1.0 0.0 - 1.0 - 2.0 % capacitance chan g e - 3 .0 - 4.0 1 10 100 1000 10 000 di ss ipation factor v s . volta g e di ss ipation factor dc volt s applied 0.025 0.02 3 0.021 0.019 0.017 0.015 0.01 3 0 10 20 3 0 40 50 - 75 - 50 - 25 0 25 50 75 100 125 0.0 di ss ipation factor v s . temperature temperature c % di ss ipation factor 0.5 1.0 1.5 2.0 2.5 3 .0 3 .5 4.0 4.5 5.0 x8r 150 175 volta g e coefficient of capacitance capacitance chan g e in % dc volt s applied 0.0 - 5.0 - 10.0 - 20.0 - 15.0 - 25.0 0 10 20 3 0 40 50 10 25 100 10 000 1000 100 10 in s ulation re s i s tance ( f) 150 in s ulation re s i s tance v s . temperature temperature c
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
